散热器的内部开始生锈时，会生成黑色的氧化铁。这通常称为‘sludge’ and it can move around the central heating system causing blockages in pipes and valves. The central heating system will not work as efficiently when these blockages are present and therefore it is important that they are removed as soon as possible. However, if all the radiators in a property have to be removed and cleaned individually, this can be a very time consuming process. Power flushing can be used to remove this 污泥 without the need to clean each radiator separately, and it also has a number of other advantages.
用于冲洗电源的设备 is connected to the whole of the central heating system. This equipment is usually set up outside of the property and a cleaning agent is added to the water within the central heating system. When the heating is turned on this cleaner will begin to start to work its way through this system and the rust within the pipes will start to be loosened almost immediately. The 污泥 becomes loosened when cold spots in the radiators are vibrated. A magnet filter is then used to collect both rust and 污泥.
If problems with a central heating system begin to be noticed by a home owner then it may be worth checking whether there are any blockages in the system, and if this is the case then power flushing is likely to be the most efficient course of action that can resolve this problem. Most companies will offer a free quote with no obligation so the home owner is able to make an informed decision about whether they wish to use power flushing to rectify the problems with their central heating. It is worth remembering that if 污泥 has started to build up in the radiators then this problem is only likely to get worse if no action is taken.